A SERVICE OF

logo

English
12 2. CABLE CONNECTION
2. CABLE CONNECTION
NOTE
Be sure that the power switches of both the PC and the monitor are OFF.
Please refer to the manual of the PC also to connect the monitor.
1. Pivot the panel in the counter-clockwise to fix in portrait position.
2. Plug the signal cable into the connector at the rear of the monitor
and the other end of the cable into the video connector on the PC.
After connecting, secure the connection with the screw-in fasteners.
Signal Cable Connector PC
Signal Cable (FD-C39 enclosed)
Video Output Connector /
DVI
Exclusive graphics board
3.
Plug the power cord into the power connector on the rear of the
monitor.
Power Cord
90
°
Signal Cable
FD-C39