22 6. SPECIFICATIONS
6. SPECIFICATIONS
CRT 55 cm (21 inch) class, 90° deflection Invar Shadow
Mask with Anti Reflective SuperErgoCoat
®
CRT Dot Pitch 0.25 mm (Horizontal: 0.21 mm)
Scan Frequency Horizontal 30 kHz- 130 kHz (Automatic)
Vertical 50 Hz-160 Hz (Automatic)
Recommended Resolution 1600 dots x 1200 lines
Max. Active Display Area*
1
400 mm (H) x 298 mm (V) (15.7” (H) x 11.7” (V))
(Viewable image size: 498 mm (19.6”))
Power Supply 100-120/200-240 VAC±10%, 50/60 Hz, 1.9 A/0.9 A
Power Consumption Normal/Max.: 135 W/160 W**
(**With EIZO optional speaker attached)
PowerManager Mode 1: Less than 10 W
PowerManager Mode 2: Less than 3 W
Input Connector D-Sub mini 15-pin and BNC × 5 (Switchable)
Input Signal Sync a) Separate, TTL, Positive/Negative
b) Composite, TTL, Positive/Negative
c) Sync on Green, 0.3 Vp-p, Negative
Video Analog 0.7 Vp-p/75 Ω, Positive
Signal registration 20 signals (Factory preset 2 modes)
Plug & Play VESA DDC 2B
Dimensions 494 mm (W) x 486 mm (H) x 520 mm (D)
(19.4” (W) x 19.1” (H) x 20.5” (D))
Weight 31.0 kg (68.3 lbs.)
Temperature operating: 0°C to 35°C (32°F to 95°F)
storage: -20°C to 60°C (-4°F to 140°F)
Humidity 30% to 80% R.H. Non-condensing
Certifications and Standards
100-120 VAC NRTL/C-TÜV, FCC-B, DHHS, TCO’99*
2
, EPA
ENERGY STAR
®
Program
220-240 VAC CE, CB, TÜV Rheinland/GS, TCO’99*
2
, EPA
ENERGY STAR
®
Program, TÜV Eco Circle 2000
*
1
Display size can be set by the user through microprocessor control panel. The
actual size displayed can be dependent on the graphics board or PC utilized.
*
2
Applicable to gray (standard) color version only.
•Factory Defaults
Default settings are as follows.
<Contrast> 100% / 50% <Color> Standard/9,300K
<Moiré Reduction> 0% <PowerManager> On
<Fine Contrast> Text Mode <Off Timer> Disable
<Signal Filter1> Mode 1 <Button Setting> Auto Sizing
<Signal Filter2> 100% <Input Signal> Auto
