A SERVICE OF

logo

English
2. CABLE CONNECTION
13
2-2. Connecting the Signal Cable
NOTE
Be sure that the Power buttons of both the PC and the monitor are OFF.
1. Plug the signal cable into the connector at the rear of the monitor
and the other end of the cable into the video connector on the PC.
After connecting, secure the connection with the screw-in fasteners.
Analog Input
Signal Cable Connector of PC PC
FD-C16 or MD-C87
enclosed
Video Output
Connector D-Sub mini
15 pin
Standard graphics card
Macintosh G3 (Blue &
White) / Power Mac G4
(VGA)
FD-C16 or MD-C87 enclosed
+ Adapter*
Video Output
Connector D-Sub mini
15 pin
Macintosh
*Macintosh Adapter (Optional)
Digital Input
Signal Cable Connector of PC PC
FD-C39
(Optional)
Video Output
Connector DVI
Power Mac G4 (DVI)
Digital graphics board
NOTE
The monitor is not compatible with a Power Mac G4/G4 Cube ADC (Apple
Display Connector)
FD-C16
Power Cord
DVI
D-Sub mini 15 pin
MD-C87
DVI
Power Cord
FD-C39 (Optional)