Mitel 5330/5340 IP Phones - User Guide
39
indicator. At this point, you can press the key for the paired device to display the
battery level, protocol, firmware, hardware, and IPEI information for the device.
− Press Close to exit.
To unpair a cordless accessory:
1. Press Applications and then press Cordless Devices.
2. Press the device name that you want to unpair. The information screen for the selected
device appears.
3. Press Unpair this Device. If the accessory is in use, an error message is displays.
Otherwise, the accessory is unpaired, removed from the display, and can no longer be
used to interact with the phone.
4. Press Close.
For more information about the Cordless Devices Application, see page 46.
Cordless Module LED Indicators
The Cordless Module has a blue light-emitting diode (LED) that indicates the current status of the
module (See Figure 1):
Blue LED Function
Solid Audio is active between the module and either the handset or headset.
Blinking Pairing mode is active or a firmware upgrade is in progress.
Off No audio is active.
Solid for 2 seconds Pairing is successful.
Blinking: LED is On and Off for equal amount of time
