A SERVICE OF

logo

Open as PDF
next previous
magicolor 330 - Base Engine Service Manual 9-203
Removal and Replacement Procedures
RRP 9.99 Lower Guide Assembly (PL9.2.26)
Removal
1. Remove the Upper Guide Assembly (RRP 9.98).
2. Remove the screw securing the Lower Guide Assembly to the frame.
3. Slide the Guide to the rear of the Fuser to unhook the latches, and remove the Guide.
Replacement
1. Reinstall the Lower Exit Guide by positioning the Guide slightly to the rear of the installed position and
with the Heat Roll Fingers resting on the Heat Roll.
2. Slide the Guide to the front of the Fuser, making sure you hook the three latches that are under the
Guide.
3. Line up the screw hole in the Guide with the screw hole in the Fuser frame and use one screw to
secure the Guide to the Fuser.
4. Reinstall the Upper Guide Assembly (RRP 9.98).