
Showroom programme
This function enables the oven to be
demonstrated in showrooms without
heating up. It should not be set for
domestic use.
Demo mode
–
On
Touch the OK sensor for at least
4 seconds to activate demo mode.
If activated, the message "Demo
mode active. The appliance will not
heat up" will appear in the display
when the oven is switched on.
– Off
Touch the OK sensor for at least
4 seconds to deactivate demo mode.
The oven can then be used as
normal.
Factory default
–
Settings
Any settings that you have altered
will be reset to the factory default
setting.
–
User programmes
All user programmes will be deleted.
–
Recommended temperatures
Recommended temperatures which
have been changed will be reset to
the factory default settings.
Settings
45