11
-
12
ME
CS1000 Code Scanner
OB15-11
OB15 MB Description
148
01183 P1183 Right cylinders bank cut-off output stage malfunction
01184 P1184 Left cylinders bank cut-off output stage malfunction
01185 P1185 Water in engine oil, Oil sensor
01186 P1186 Fuel safety shut-off recognized.
01225 P1225 Resonance intake manifold switchover valve circuit
01235 P1235 Air-flap recirculated signal output stage faulty
01236 P1236 A/C compressor output stage, magnetic combination incorrect
01300 P1300 CKP sensor circuit failure - Bank 2 (left)
01384 P1384 Knock sensor circuit malfunction - Left front.
01385 P1385 Knock sensor circuit malfunction - Left rear.
01386 P1386 Knock sensor control from electronic control module - at limit
01397 P1397 CMP sensor circuit range/performance - Bank 2 (left)
01400 P1400 EGR (exhaust gas recirculation) output stage faulty
01420 P1420 Air-pump switchover valve circuit
01443 P1443 EVAP system malfunction - Bank 2 (left)
01453 P1453 Air-pump relay, relay module, fuse or circuit
01463 P1463 Left AIR system malfunction
01490 P1490 EVAP system purge control valve circuit malfunction - Bank 2 (left)
01491 P1491 A/C system refrigerant pressure too high
01492 P1492 Exhaust-flap faulty
01519 P1519 Right or sole adjustable camshaft timing solenoid mechanically faulty.
01522 P1522 Left adjustable camshaft timing solenoid mechanically faulty.
01525 P1525 Right or sole adjustable camshaft timing solenoid electrically faulty
01533 P1533 Left adjustable camshaft timing solenoid electrically faulty
01542 P1542 Pedal position sensor signal
01570 P1570 CAN bus signal from DAS to the ME-SFI control unit - DAS locked, signal
interrupted, mismatched ECMs.
01580 P1580 Right or sole EA/CC/ISC Actuator circuit faulty
01581 P1581 Left EA/CC/ISC Actuator circuit faulty
01584 P1584 Stop lamp switch/Brake switch signal
01587 P1587 Left engine control module voltage supply faulty.
01588 P1588 CAN bus signal from the RCL controller to the Left engine controller faulty.
01589 P1589 Knock sensor control from the left engine controller at limit.
01603 P1603 CAN bus problem. No data reception from EIS
01605 P1605 CAN fault. ABS speed sensor error vs. VSS (RPM)
01632 P1632 Left engine control module faulty.
01641 P1641 Right of left CTP signal to the engine control module faulty or CAN bus
communication by the left engine control has been interrupted.
