82
11.5 Change Wireless Setting
Please follow the steps below to change the Timer Record setting through the network as and when
necessary.
1. Click the
button on the home page to enter the setup mode.
2. Click the
connection on the setting page to enter the WIRELESS SETTING
page.
3. Set the ESSID to change the wireless network name.
4. Adjust the wireless setting, including the “CHANNEL”, “ENCRYPTION”, and “DEFAULT KEY”
as and when necessary.
5. If ENCRYPTION is set to “DISABLE”, the user cannot change the WEP KEY 1 … WEP KEY 4.
If ENCRYPTION is set to “WEP64”, the web key can be set to a 10-hex number. If
ENCRYPTION is set to “WEP128”, the web key can be set to a 26-hex number.
6. Click the
button to submit the new wireless setting.
7. Click the
button to return to the home page while the new image setting acts on
the images to effect the desired changes instantly. (If the setting has not been changed by the
above steps, any (re)entry onto the home page will find images in their earlier or original
setting. )
