16
ENGLISH
CLEARING STORED PRESET STATIONS
You can remove preset stations from the memory
using the following procedure.
3. 2.
3. 2.
RECORDER
F/PBAND
BALANCE
SPEAKERS
DISPLAY OFF
2
1
BASS
TREBLE
CLEAR
MEMORY
21AUXTUNERCDPHONO
ER SR4021
DIMMER
PHONES
CLEAR
MEMORY
1.
Recall the preset number to be cleared with the
method described in “RECALLING A PRESET
STATION”.
2.
Press the MEMORY button on the front panel
or MEMO/PROG. button on the remote control
unit.
3.
“MEMORY” indicator blinks in the display for
5 seconds. While blinking, press the CLEAR
button on the front panel or press the CLEAR
button on the remote control unit.
4.
“CLEAR” appears on the display to indicate
that the specified preset number has been
cleared.
NAME INPUT OF THE PRESET STATION
This function allows the name of each preset channel
to be entered using alphanumeric characters.
Before inputting names, you need to store preset
stations with the preset memory operation.
SPEAKERS
DISPLAY OFF
2
1
BASS
TREBLE
CLEAR
MEMORY
TUNERCDPHONO
MULTI JOG
RECEIVER SR4021
SLEEP DIMMER
STANDBY
PHONES
OWER ON/OFF
CLEAR
MEMORY
MULTI JOG
4. 3. 2. 5. 6.
4.
2.
5.
1.
Recall the desired preset number with the
method described in “RECALLING A PRESET
STATION”.
2.
Press the MEMORY button on the front panel
or press the MEMO / PROG. button on the
remote for more than 3 seconds.
3.
The left most column of the station name
indicator fl ashes, indicating the character entry
ready status.
4.
When turn the MULTI JOG knob on the front
panel, alphabetic and numeric characters will
be displayed in the following order:
A → B → C ...Z → 1 → 2 → 3..... 0 → – → +
→ / → (Blank) → A
Clockwise →
← Counter clockwise
Numeric keypad Display
1
A
→ B → C → 1 → A
2
D
→ E → F → 2 → D
3
G
→ H → I → 3 → G
4
J
→ K → L → 4 → J
5
M
→ N → O → 5 → M
6
P
→ Q → R → 6 → P
7
S
→ T → U → 7 → S
8
V
→ W → X → 8 → V
9
Y
→ Z → space → 9 → Y
0
–
→ + → / → 0
5.
After selecting the fi rst character to be entered,
press the MEMORY button on the front panel
or press MEMO/PROG. button on the remote.
The entry in this column is fi xed and the next
column starts to flash. Fill the next column
using the same method.
Note:
Unused columns should be fi lled by entering blanks.
6.
To save the name, press the MEMORY button
for more than 3 seconds to confi rm the entry.
