89
Menu map
For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page.
By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences.
How to make detailed settings
Setting items Detailed items Description Page
Audio
Dialog Level Sets the output level to clarify the dialogue
output from the center channel.
94
Subwoofer Level This setting adjusts the volume level for the
subwoofer.
94
Surr.Parameter Adjusts surround sound parameters.
94
Tone Adjusts the tonal quality of the sound.
95
M-DAX Expands the low and high frequency components
of compressed audio content such as MP3 files
to enable richer audio playback.
96
Audio Delay Compensates for incorrect timing between video
and audio.
96
Volume Set the MAIN ZONE (room where the unit is
located) volume setting.
96
Audyssey Makes Audyssey MultEQ
®
, Audyssey Dynamic
EQ
®
and Audyssey Dynamic Volume
®
settings.
97
Manual EQ Uses the graphic equalizer to adjust the tone of
each speaker.
98
Video
HDMI Setup Makes settings for HDMI video/audio output.
100
On Screen Disp. Select the on-screen display user interface
preferences.
101
TV Format Set the video output signal format for the TV you
are using.
101
Inputs
Input Assign Changes input connector assignment.
103
Source Rename Changes the display name for this source.
105
Hide Sources Remove from the display input sources that are
not used.
105
Source Level Adjusts the playback level of the audio input.
105
Input Select Sets the audio input mode and decode mode.
105
Speakers
Audyssey
®
Setup The acoustic characteristics of the connected
speakers and listening room are measured and
the optimum settings are made automatically.
23
Manual Setup Perform when setting the speakers manually
or when changing settings made in Audyssey
®
Setup.
107
Setting items Detailed items Description Page
Network
Information Display network information.
111
IP Control Enables network communication in standby
power mode.
111
Friendly Name The Friendly Name is the name of this unit
displayed on the network. You can change the
Friendly Name according to your preferences.
111
Settings Make settings for wired LAN.
112
Diagnostics Used to check the network connection.
113
Maintenance Mode Use when receiving maintenance from a Marantz
service engineer or custom installer.
113
General
Language Sets the language for display the menu on the
TV screen.
115
Auto Standby When you do not perform any operation on this
unit with no audio or video input for a specified
time, this unit automatically enters the standby
mode. Before it enters the standby mode, “Auto
Standby” is displayed on the display of this unit
and the menu screen.
115
Front Display Makes settings related to the display on this unit.
115
Information Show information about receiver settings, input
signals, etc.
116
Usage Data Selects whether or not to send anonymous
usage data to Marantz.
117
Firmware Set whether or not to check for firmware update,
update the firmware, and display update and
upgrade notifications.
117
Setup Lock Protect settings from inadvertent changes.
118
Setup
Assistant
Perform the installation, connection, and setup procedures to prepare the
unit for operation following guidance from the setup section of this manual.
C 7
