33
ENGLISH
– Reset All
Resets all settings to their factory defaults except the user-selected gamma curve and the lamp life counter. When you select
“Yes”, the following message appears on the screen.
Select “Yes” and press the ENTER button.
❖ How to Operate the Config Menu
1. Select the desired menu item and press the 2 button.
The setting item will appear on the screen.
2. Use the 3 and 4 buttons to set the item.
3. Press the 1 button to enter the setting and return to menu item selection.
You can turn the trigger signal output from the TRIG. 2 jack on (12 V output)/off (no output) for each of the aspect modes: Full,
Normal, Zoom and Through. This trigger signal can be used to automatically match the screen aspect mode to projector operation,
though it requires a powered dual aspect screen.
On: 12 V output
Off: No output
❖ How to Operate the Trigger 2 Menu
1. Select the desired menu item and press the 2 button.
The setting item will appear on the screen.
2. Use the 3 and 4 buttons to set the item.
3. Press the 1 button to enter the setting and return to menu item selection.
2.
2.
