40 Screen Saver, Angle Mark
Screen Saver
The Screen Saver is the moving DVD logo that appears on your TV screen
when playback is stopped. It prevents damage to your TV screen caused by
leaving a still image on the TV too long.
1
Press SYSTEM MENU.
2
The General Setup Page will be selected. Press OK or 4.
3
Press 4 to select Screen Saver,then press 2.
4
Press 3 or 4 to select On or Off,then press OK.Choose On to have
the Screen Saver appear on your TV screen when you have not used
the Player or its remote for approximately five minutes and playback is
stopped.To disable the screen saver,choose Off.A dark blue DVD
screen will appear when playback is stopped.
5
Press SYSTEM MENU to remove the menus.
Angle Mark
Some DVD contain scenes that you can view from different angles or
perspectives.If available,you can set the Angle Mark to appear during DVD
playback to remind you when multiple angles are available.
1
Press SYSTEM MENU.
2
The General Setup Page will be selected. Press OK or 4.
3
Press 4 to select Angle Mark,then press 2.
4
Press 3 or 4 to select On or Off,then press OK.
5
Press SYSTEM MENU to remove the menus.
6
During DVD play,if the Angle Mark ( ) appears,press the ANGLE
button repeatedly to see the picture from a different perspective.Details
are on page 23.
1,5
2-4
