4
Maestro User Guide
Hold - Continuing a call on another phone
If you want to continue your conversation at another extension, press
H
OLD
and hang up
the receiver. The hold feature keeps the caller on the line until you pick up the extension
telephone.
Note:
If you receive a Call Waiting ID call while a call is on hold, Call Waiting ID infor-
mation will not be displayed.
Using Speaker/Mute
The Mæstro 3500CW’s built in speaker and microphone allow you talk and hear without
holding the receiver to your ear. If you wish to answer a Call Waiting ID call while using
Speaker/Mute, simply press
F
LASH
, as usual, to connect the second call.
Receiver volume
While you are on the phone, you can press the left or right side of the volume bar
—
for soft or loud receiver volume.
Ringer volume
Press the left or right side of the volume bar
—
for soft or loud ringer volume. If
you don’t want to be disturbed you can turn the ringer OFF by pressing the left side of the
volume bar
—
without lifting the receiver. Ringer is OFF may appear on the
display unless other messages have priority. You can adjust ringer volume and tone in the
OPTIONS list, as long as the ringer has not been turned OFF. When you want to turn the
ringer ON, press the right side of the volume bar
—
without lifting the receiver.
Placing a call with Speaker/Mute:
Answering a call with Speaker/Mute:
1. Press
S
PAKER
/M
UTE
and wait for the
dial tone. Light goes on.
1. When the phone rings, press
S
PEAKER
/
M
UTE
. Light goes on.
2. Enter the number you wish to call and
speak as usual.
2. Speak as usual.
3. Press
G
OODBYE
to disconnect your
call.
3. Press
G
OODBYE
to disconnect your
call.
Note:
You may turn off the audio so that your caller cannot hear you at anytime when
using Speaker/Mute. Simply press
S
PEAKER
/M
UTE
during your call. The small light
beside the key will begin to flash when Mute is active. Press
S
PEAKER
/M
UTE
again
to turn sound back on.
P0834568 01 E UG 3500 US Page 4 Tuesday, April 25, 2000 3:48 PM
