Chapter 3 Main System Application
[HotLine Option]
The HotLine Notice Interval allows you to specify the time interval between each notification.
For example, if the interval time you specified is 5 minutes, then the system will calls to your
phone/pager every 5 minutes if motion still persist. The system will stop calling when no
motions are detected.
[HotLine Attach Audio Message]
You can specify how many times to repeat the audio message when the system notifies you
by Telephone.
Camera / Audio Install
Click [System Configure] button and select “Camera / Audio Install” option and the
following window will appear.
[Camera]:
Activate: Click on the [Activate] button and a camera list menu will appear. You’ll find a
check box before each camera; click on the check box to activate or
deactivate the cameras.
B/W: When the picture is jammed due to installation of both color and
monochrome cameras on the system, select B/W to change all video display
to monochrome. (Available only on GV-200)
[Start Up]:
You may set the channel number for the camera to be activated and start up the function in
next program execution.
Note
If you are using 16Cam / 4Port then Start Up, Camera Scan will disclose the desired
Camera number by the quantity of Port so as to scan camera function.
Page 41
FOR ADDITIONAL QUESTIONS CONTACT TECHNICAL SUPPORT TEAM @ 1 (866) 392-MACE
