A SERVICE OF

logo

28 Enter Data
MX6 User’s Guide E-EQ-MX6OGWW-E-ARC
Aiming at a Barcode
Aim the beam aperture away from you, direct it at the barcode and press the trigger or button (as
applicable) to scan. The Scan LED (scan indicators are located above the display) turns red to
indicate the imager is on.
Imager
Adjust the aim so that the green aiming beam is centered on the barcode. The light emitted from
the imager must cover every bar and space on the barcode. When scanning a 2D Matrix barcode,
the scan beam must cover the entire barcode.
Scanner
Adjust the aim so that the red aiming beam is centered on the barcode. The red light emitted from
the laser scanner must cover every bar and space on the barcode. The laser scanner cannot
read/translate a 2D Matrix barcode.
Linear Barcode
Correct Scan Angle
Incorrect Scan Angles
2D Matrix Barcode
Figure 25 Scan Beam