A SERVICE OF

logo

9
Chapter 4: Connecting the Wireless-G Travel Router with SpeedBooster
Hardware Installation
Wireless-G Travel Router with SpeedBooster
3. For setup or if using a wired connection, connect a standard Ethernet network cable from the Router’s
Ethernet port to your PC.
4. Slide the Power Slide until the Power Plug is fully extended or connect the power cable. (Routers outside the
Western Hemisphere are not equipped with a Power Slide.) Then, connect the Power Plug to an electrical
outlet.
Now that the hardware installation is complete, proceed to “Chapter 5: Configuring the Wireless-G Travel
Router with SpeedBooster.”
Figure 4-3: Connecting the Power
Figure 4-2: Connecting to the PC