English Manual
Operation
User arbitration and keyboard indicators
During operation, all of the connected video monitors continuously receive the output from the
host system. Control of the host system is arbitrated by the LINDY Console Switch on a first
come, first served basis. In the idle state, control is available to all users and their keyboard
indicators will show the current Num Lock, etc. conditions of the host system.
At the moment that a key is pressed or a mouse is moved, the keyboards and mice of the other
users are temporarily locked-out (the video images remain). The keyboard indicators of the
locked-out users then begin to flash to confirm their status:
After two seconds of inactivity from the user currently in control, the LINDY Console Switch
returns to its idle condition and the re-instates the keyboard indicators of the locked-out users.
LINDY Console Switch indicators
The red indicators on the front panel of the LINDY Console Switch illuminate to show which
user currently has control. The green indicator illuminates when the power supply is connected
and switched on.
Video boost feature
The LINDY Console Switch offers a video boost feature which provides amplification to
compensate for losses introduced by long video cables. The effect of this is to ensure that the
video images remain sharp even at high resolutions over relatively long distances.
To enable video boost
• Click switch 2 (the LINDY Console Switch may be powered on or off) down into its ON
position.
Resetting LINDY Console Switch
A reset option is provided.
To reset the LINDY Console Switch
• Momentarily click switch 3 down into its ON position and then back up to its OFF state.
