Radio Frequency Energy and Certifications
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (MAR 2003)
Specifications
unction 2 Port Model 4 Port Model
PC Ports 2 4
Port Selection Top Panel Switch Button or
Keyboard Hot Keys (SCROLL LOCK)
Keyboard 1x mini-DIN 6 female 1x mini-DIN 6 female
Mouse 1x mini-DIN 6 female 1x mini-DIN 6 female
Connectors
Video 1x HD-15 female 1x HD-15 female
Computers 2x2 mini-DIN 6 female
2x1 HD-15 female
4x2 mini-DIN 6 female
4x1 HD-15 female
Auto Scan Interval 8 seconds
Power Powered by PCs connected via PS/2 ports
Operating Temperature 5 ~ 40
o
C
Storage Temperature -20 ~ 60
o
C
Humidity 0 ~ 80% RH, Noncondensing
Housing Transparent pastic inside silver couloured
Dimensions (L x W x H) 12 x 9 x 3,5 cm 19 x 9 x 3,5 cm
CE Statement
This device complies with the European Regulations for Electromagnetic Compatibility (EMC) of the European Union and it is equipped with the
CE mark. This unit has to be used with high quality shielded connection cables and with the enclosed power supply only. Only if these high
quality shielded cables are used it can be sure that the EMC compatibilty is not badly influenced.
FCC Statement
Shielded cables must be used with this equipment to maintain compliance with radio frequency energy emission regulations and ensure a
suitably high level of immunity to electromagnetic
disturbances.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B Digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
" Reorient or relocate the receiving antenna
" Increase the separation between the equipment and receiver
" Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
" Consult the dealer or an experienced technician for help
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to
operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation
LINDY No. 32924, 32925, 32926, 32927
For Home and Office Use
Tested to comply with FCC Standards
