Lifetime 6417 Manual

A SERVICE OF

next previous

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

41

SEC

ADZ (x64)

SEC

5.1

SEC

5.2

Starting at the back of the Shed, secure a Truss Frame Assembly to the center of each Left and Right Wall

Panel with the 1/4” x 5/8” Pan-Head Screws (ADZ). DO NOT use the 1/4” x 5/8” Pan-Head Screws (ADZ) to secure

the Truss Frame Assembly to the center divider in the Window Wall Panel.

3ECURETHE4RUSS&RAME!SSEMBLYTOTHECENTERDIVIDERINTHE7INDOW7ALL0ANELWITHTWO#10 x 3/8” Flat-

Head Screws (ACD) through the holes in the center of the Window Wall Panels, and secure the Truss Frame

!SSEMBLYTOTHECENTERDIVIDERWITHTWO#10 Cap Nuts (ADK). Repeat this step for second Window Wall Panel.

TRUSS INSTALLATION

5

Note: After installing Truss Assembly, tighten nuts completely.

!

ADK (x4)

ACD (x4)

WARNING

Do not overtighten the Cap Nut. If the end of

the Bolt breaks through the plastic cap, call our

Customer Service Department. Exposed threads

on the end of the Bolt may cause serious injuries.

3/8” X

100XXXX