A SERVICE OF

logo

3
HA
HB
Truss Channel
Truss Channel
Truss Channel
1.3: Loosely attach a Truss Bracket Assembly to a Truss Channel using one (1) Hex Bolt (HA) and
one (1) Cap Nut (HB) through the hole at the position shown.
1.1: Slide Truss Bracket B (B) into Truss Bracket A (A) and align the holes as shown. Secure with two (2) 1/4”-20
x 1 1/2” Hex Bolts (HA) and two (2) Cap Nuts (HB).
1.2: Repeat Step 1.1 for each Truss Bracket Assembly.
Angled end of Truss Bracket B (B) faces down.
HA
HA
HB
HB
B
A
Bottom
Top
Top
Bottom