21
Appliance Information
Record this information when the appliance is
installed.
Type Designation: _________________________
Service Number: __________________________
Appliance / serial number: ___________________
Date of Purchase: _________________________
Where Purchased: _________________________
Customer Service - Figure 20
If none of the above causes apply and you
cannot correct the fault yourself, or if the
temperature display reads
“
F1” to “F5”, this
means there is a fault. Please contact your nearest
customer service department (see enclosed list for
addresses).
Give the fault number displayed, together with the
Type Designation
cn
,
Service Number
co
and
Appliance / serial number
cp
as given on the model plate, to ensure prompt,
accurate servicing. The model plate is located
inside the appliance on the left-hand side.
Leave the appliance closed until the customer ser
-
vice engineer arrives to prevent any further cold
loss.
Figure 20
