Water temperature selector
Press the button to select water temperature.
The water temperature
[40C 50C 60C cold 30C] during Coloreds
program.
95C is selected only for White program.
For manual wash, rinse and spin speed
Use these buttons to change washing method,
rinse method and spin speed.
When lamp is off, no selection has been made.
Prewash is available for Coloreds,
Whites, Synthetic program.
Rinse hold
If you desire to leave fabrics in the machine
without spinning after rinse to prevent them
getting wrinkled, you may select rinse Hold by
pressing the Rinse button.
To drain and spin, press the Rinse button to
turn off the rinse Hold lamp.
Child - lock
The Child Lock system can be programme and canceled by
pressing bothWater Temp.and Ecosimultaneously.
Once this system is set, all button are inoperable work
during operation.
(Child Lock Lamp is on on when it is selected.)
The Child Lock system can be set at any time even
including during Power-Off on. Pause and operation. It is
automatically cancelled when operational error occur and
when end of the cycle ends.
16
