- 27 -
USING THE BRIDGE COOKING ZONES
BRIDGE COOKING ZONES
The two left Cooking Zones can be used together as
a single Cooking Zone using the Bridge function.
This allows you to cook with larger, oblong pans.
NOTE: When using the supplied bridge pan, it is
important to rub it with oil to prevent burning and
sticking.
ACTIVATING THE BRIDGE COOKING ZONE
Touch the BRIDGE pad. The indicator above
the pad will light.
Touch the or pad for either left Cooking Zone
to adjust the power level for both Cooking Zones.
NOTE:
• Use the supplied bridge pan ONLY on the bridge
cooking zone.
• To purchase a replacement or additional bridge
pans, call 1-800-243-0000 and choose the
appropriate prompt from the menu. Or, visit our
Web site at http://us.lgservice.com.
USING THE TIMER
The timer feature may be helpful if a recipe calls for cooking for a set time. The timer can be set
from 1 to 99 minutes. Once set, the digital display between the timer or pads will begin
to count down the remaining time in minutes.
NOTE: The timer function is a minute timer only. It does NOT turn the cooktop ON or OFF.
SETTING THE TIMER
Touch the or pads under the word TIMER. Each touch will increase or decrease the
time by one minute, from 1 to 99 minutes. You may also touch and hold or to scroll up
or down. The timer display will flash.
Once the desired time is set, the display will stop flashing and the timer will start counting
down after no pad has been touched for 5 seconds. Once the timer reaches , a long
beep will sound to indicate the time is up.
CANCELING THE TIMER
To cancel the timer, touch the TIMER and pads at the same time, OR
Touch and hold the or pad until appears in the display.
The timer display will turn off.
OPERATING INSTRUCTIONS
LGE Internal Use Only Copyright © 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
