25
Operation
Selecting the input source
This section explains how to select the input source
(i.e., the AV component that you want to listen to or
watch).
1. Press POWER ( or ) to turn the unit on.
2. Select a source by rotating the INPUT SELECT
on the front panel.
The selected source appears in the display window.
To select the required input source using the
remote control you must ensure that the remote is
in the receiver mode. This can be verified by
pressing the RECEIVER button until it can be seen
illuminated. Once in the receiver mode simply press
the INPUT. SEL. button until it is lit and then press
the numerical key that corresponds with the desired
input. Subsequent presses of the numerical keys
will also switch to the input shown on the remote.
To cancel this function simply press the INPUT.
SEL. button again until it is not illuminated.
3. Turn on the component and start playback.
4. To adjust the volume, rotate the MASTER
VOLUME on the front panel, or press VOLUME
(-/+) on remote control.
Selecting the input mode
If you connect a component to a digital input jack, you
must assign that jack to an input source.
1. Select the input source that you want to
assign.
Some of input sources may not be assigned.
2. Press DIGITAL.
The current assignment flashes in the display
window.
3. Press DIGITAL repeatedly to select Opt. 1,
Opt. 2, Opt. 3, Coaxial or Analog.
Examples:
If you connect your DVD player to the
OPTICAL IN 1 jack, set “DVD” to “Opt. 1”.
If you want to listen to audio from the component
connected to the OPTICAL IN 2 jack when the
VCR input source is selected, set “VCR” to “Opt.
2”.
If you want to listen to audio from the component
connected to the COAXIAL IN jack when the
TV/STB input source is selected, set “TV/STB” to
“Coaxial”.
For input source that you don’t want to assign a
digital input jack, set to “Analog”.
Notes
• You can select the input mode only when you set
the input source to DVD, VCR, CD, AV, or TV/STB.
• You can also select other input mode on the
selected input source.
To mute the sound
Press MUTE on the remote control. To cancel, press it
again.
