5 Remove the stack of print media.
6 Close the finisher output bin cover.
7 Press .
Clearing staple jams
1 Lift the front edge of the finisher output bin
cover until it locks into position.
2 Remove the print media.
3 Press the latch to open the stapler access door.
4 Firmly pull the colored tab to remove the staple
cartridge holder from the stapler.
5 Use the metal tab to lift the staple guard, and
then pull out the sheet of staples.
Discard the entire sheet.
6 Remove any loose staples from the staple
guard.
7 Look through the clear covering on the bottom
of the cartridge holder to make sure no staples
are jammed in the entry throat.
8 Press down on the staple guard until it snaps
securely into place.
9 Push the cartridge holder firmly into the stapler
until the cartridge holder clicks into place.
10 Close the stapler access door.
11 Close the finisher output bin cover.
