1
Getting started
1 Select a well-ventilated place to set up your
printer. Allow at least as much space as
shown in the illustration. Make sure you
have a sturdy, low table or the optional
printer stand on which to set the printer.
2 Remove all items from the box except the
printer. If any items are missing, contact the
place where you bought the printer.
Save the carton and packing material in
case you need to repack the printer for ser-
vice or storage.
Note: Leave the printer in the box until you are
ready to install it. Then ask someone to
help you lift the printer using the hand-
holds.
Turn off the printer If your printer is already set up, make sure the
printer power is off and the power cord and any
cables are unplugged before installing any
options.
Options compatibility Options compatible with the Lexmark T522
TM
printer are labeled with a colored triangle. Label
locations are indicated in the illustrations in this
book.
Troubleshooting If you encounter a problem while setting up the
printer, refer to the Lexmark T522 Publications
CD.
137.16 cm
(4.5 ft)
304.8 mm
(12 in.)
508 mm
(20 in.)
304.8 mm
(12 in.)
304.8 mm
(12 in.)
CDs
Power cord
Printer
500 sheet drawer
Paper bail
and bracket
Operator panel
overlay
(non-English only)
Power
switch
cover
Handhold
