Copying photos
1 Load photo paper with the glossy or printable side facing down. (If you are not sure which side is the printable side,
see the instructions that came with the paper.)
2 Place a photo facedown on the scanner glass in the upper left corner. For more information, see “Loading original
documents on the scanner glass” on page 86.
3 From the control panel, press
or repeatedly until Copy is highlighted.
4 Press .
The Copy Mode menu appears with the Color value highlighted.
5 Press or repeatedly until:
• Color appears for a color copy
• Black & White appears for a black-and-white copy
6 Press to reach the Copies menu item.
Press if you need to increase the number of copies.
Note: To quickly enter the number of copies, you can use the keypad numbers.
7 Press to reach the Reduce/Enlarge menu item.
Press or repeatedly until you reach the size you want for the copied photo.
8 Press
repeatedly to reach the Quality menu item.
9 Press
or repeatedly until Photo appears.
10 Press repeatedly to reach the Content Type menu item.
11 Press or repeatedly until Photo appears.
• Press to see a preview of the photo before printing the copy
• Press to print the copy immediately
Copying on both sides of the paper (duplexing)
If your printer has a duplex unit installed, you can copy on both sides of a sheet of paper.
Note: Use plain paper in letter or A4 size for making duplex copies. Do not make duplex copies on envelopes, card
stock, or photo paper.
1 Load an original document faceup into the Automatic Document Feeder (ADF).
115
