A SERVICE OF

logo

Installing an “option-added” firmware card
24
Step 12: Installing memory, option, or interface cards
Installing an “option-added” firmware card
Note: “Option-added” firmware cards designed for other Lexmark printers will not work with the printer.
1 Remove the system board access cover from the back of the printer. (See Accessing the printer system board.)
Note: If an “option-added” firmware card has already been installed, you must remove it.
2 Unpack the “option-added” firmware card.
3 Holding the card by its sides, align the pins on the card with the holes on the system board.
4 Push the “option-added” firmware card firmly into place.
The entire length of the connector on the “option-added” firmware card must touch the system board and be
locked into the connector.
Be careful not to damage the connectors.
Pins