Check cartridges
1 Remove the print cartridges.
2 Make sure the sticker and tape have been removed.
1
2
3 Reinsert the cartridges.
Check printer default and pause settings
1 Do one of the following:
• In Windows Vista, click Control Panel.
• In Windows XP, click Start.
2 Click Printers Printers and Faxes.
3 Double-click the printer queue device.
4 Click Printer.
• Make sure no check mark appears next to Pause Printing.
• If a check mark does not appear next to Set As Default Printer, you must select the print queue device for
each file you want to print.
Reconnect power supply
1 Press to turn the printer off.
2 Disconnect the power cord from the wall outlet.
3 Gently remove the power supply from the printer.
4 Reconnect the power supply to the printer.
5 Plug the power cord into the wall outlet.
6 Press to turn the printer on.
Remove and reinstall the software
Uninstall the printer software, and then reinstall it.
Understanding Warning levels
• A green check indicates system requirements were met.
• A yellow question mark indicates system requirements were not met. Most major functions will work, but you
may experience some performance impact.
• A red question mark indicates system requirements were not met. Most major functions may not work.
• A red X indicates system requirements were not met. Installation will not continue.
For proper installation, make sure the computer supports all system requirements. System requirements are located
on the printer box.
104
