A SERVICE OF

logo

Open as PDF
next previous
TAPE PLAYBACK
1 . Set to TAPE
TO STOP PLAYBACK
Press the STOP / EJECT button.
TO INTERRUPT PLAYBACK
Press the PAUSE button.
Toresumeplay,pressthePAUSEbuttonagain.
TO FAST WIND
Press the REWIND or F.FWD button. Press the STOP/
EJECTbuttontostopwindingatthedesiredposition.
PLAY
FUNCTION
TAPE
3 . Press the PLAY button.
2 . Insert the cassette.
GB 5
Note on CD-R/RW discs
- Becauseofnon-standardizedformatdenition/productionofCD-R/RW,playbackqualityandperformancearenot
guaranteed.
- ManufacturerisnotresponsiblefortheplayabilityofCD-R/RWduetorecordingconditions,suchasPCperformance,
writingsoftware,mediaability,etc.
- Do not attach a seal or label to either side of the CD-R/RW disc. It may cause a malfunction.
- ItisrecommendedtorecordonlyaudiolesonCD-R/RWdiscsforeasyreading.
PROGRAMMED PLAYBACK
PROGRAMMED PLAYBACK
FOR NORMAL COMPACT DISC PLAYBACK
Programmedplaybackenablestracksonadisctobe
played in the desired order. Up to 20 tracks can be
programmed.
1. Press the " PROGRAM " button.
2. Press the " NEXT " and " BACK " buttons to select
the desired track number.
3. Pressthe"PROGRAM"buttonagaintomemorize
the track.
4. Repeat steps 2 and 3 until all desired tracks are
programmed.
5. Press the " PLAY/PAUSE " button to start.
" " , " PROG " & track number are shown on the
CD display.
6. Press the " STOP "buttononcetostopprogrammed
playback.
7. Press the " PLAY/PAUSE " button to resume
 programmedplayback.
8. Open the CD door, turn off the CD player or press the
" STOP "buttontwicetocleartheprogrammed
memory.
Note: Programmingcanonlybemadewhentheplayer
is in stop mode.
FOR MP3 / WMA PLAYBACK
Programmedplaybackenablesfolders/albumsortracksona
disc to be played in the desired order. Up to 20 folders/albums
ortrackscanbeprogrammed.
1. Press the " PROGRAM " button.
2. Press the " NEXT " and " BACK " buttons to select
the desired track number.
3. Pressthe"PROGRAM"buttonagaintomemorize
the track.
4. Repeat steps 2 and 3 until all desired folders or
tracksareprogrammed.
5. Press the " PLAY/PAUSE " button to start.
" ", " PROG " and " MP3 / WMA " & track
number are shown on the CD display.
6. Press the " STOP "buttononcetostopprogrammed
playback.
7. Press the" PLAY/PAUSE " button to resume
 programmedplayback.
8. Open the CD door, turn off the CD player or press the
" STOP "buttontwicetocleartheprogrammed
memory.
Note: Programmingcanonlybemadewhentheplayer
is in stop mode.
MP3 / WMA display
" PROGRAM "
CD display
" PROGRAM "
CD30MP3 LENCO SCR-98MP3 ENG TCD17 7 5/4/2013 10:56:42