5: Commands and Levels
XPort Pro Command Reference 109
<line> = number of the line (lpd serial port) to be confi-
gured.
Removes the Local IP address.
Removes the PPP authentication password.
Removes the peer IP address.
Removes the PPP authentication username.
Sets the password for PPP authentication.
Sets the IP Address assigned to the peer when requested
during negotiation.
<ip address> IP address of the peer device.
Enters the serial line PPP level.
Displays the current configuration.
show history Displays the last 20 commands entered during the current
Enters the configure-terminal level.
<line> = number of the terminal line (serial port) to be con-
Enters the configure-terminal level for the network.
tunnel <line>
Enters the tunnel level.
<line> = number of the tunnel line (serial port) to be confi-
Sets the user name for PPP authentication.
Stores the current configuration in permanent memory.
query port (config-query_port) level commands
Zeros Query Port counters
Returns to the config level.
Unzeros Query Port counters
Displays statistics and information about the query port.
Displays the last 20 commands entered during the current
CLI session.
Disables response to 77FE requests.
Permits response to 77FE requests.
Stores the current configuration in permanent memory.
Ping destination continuously with 5 second timeout
Ping destination n times with 5 second timeout
ping <host> <count> <timeout>
Ping destination n times with x timeout (in seconds)
show history Displays the last 20 commands entered during the current
Trace route to destination
rss (config-rss) level commands
