MAINTENANCE WORK ON CHASSIS AND ENGINE 82
9.104Changing engine oil and oil filter, cleaning engine oil screen x
301489-10
–
Drain the engine oil and clean the engine oil screen. x ( p. 82)
–
Remove the oil filter. x ( p. 82)
–
Install the oil filter. x ( p. 83)
–
Fill up with engine oil. x ( p. 83)
9.105Draining engine oil, cleaning engine oil screen x
Warning
Danger of scalding Engine oil and gear oil get very hot when the motorcycle is ridden.
– Wear appropriate protective clothing and safety gloves. In case of burns, rinse immediately with lukewarm water.
Warning
Environmental hazard Hazardous substances cause environmental damage.
– Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Info
Drain the engine oil only when the engine is warm.
– Stand the motorcycle on its side stand on a horizontal surface.
200112-10
– Place a suitable container under the engine.
– Remove engine oil plug screen .
– Completely drain the engine oil.
– Thoroughly clean the plug and engine oil screen.
– Clean the sealing surface on the engine.
– Mount and tighten the engine oil screen drain plug .
Guideline
Plug, engine oil screen M17x1.5 20 Nm
(14.8 lbf ft)
9.106Removing the oil filter x
Warning
Danger of scalding Engine oil and gear oil get very hot when the motorcycle is ridden.
– Wear appropriate protective clothing and safety gloves. In case of burns, rinse immediately with lukewarm water.
Warning
Environmental hazard Hazardous substances cause environmental damage.
– Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
– Place a suitable container under the engine.
200113-10
– Remove screws . Remove oil filter cover with the O-ring.
