12
|
KDC-X492/KDC-MP438U/KDC-MP408U/KDC-MP338
Menu Operation
Menu System
Set up the following functions;
Display Setting Setting overview
Source
“SECURITY
SET”/
“SECURITY
CLR”
Refer to
page 12
Sets/Resets security code
“CLOCK
ADJUST”
Refer to
page 13
Sets the clock.
“DISPLAY” ON*/OFF Turns off the display when no
operation is performed.
—
“DIMMER”
*
1,2,3
AUTO*/OFF Dims the display in conjunction
with the light switch of the
vehicle.
“DIMMER”*
4
ON/OFF* Adjusts the brightness of
the display according to the
surrounding illumination.
—
“DOT LINE” ON*/OFF Specifies whether to display the
red dotted line on the display.
“SWPRE”*
3,4
REAR*/
SUB-W
Sets the preout output.
“AMP”*
1,2
ON*/OFF Turns on/off the built-in amplifier.
“AMS
CONTROL”*
1
Refer to
page 13
Controls the connected LX
amplifier.
—
“ZONE2”*
1,2,3
REAR*/
FRONT
Specifies the destination of AUX
input sound when the Dual Zone
function is turned on.
“SUPREME” ON*/OFF Turns ON/OFF the Supreme
function.
“CRSC” OFF/ON* Switches to Monaural to decrease
noise when reception is poor.
“NAME SET” Refer to
page 14
Sets the display when switched
to AUX source.
“SCROLL” AUTO*/
MANUAL
Specifies whether the text is
scrolled automatically.
—
“RECEIVE
MODE”
Refer to
page 14
Sets the receive mode of HR radio.
“ESN” — Displays the Electronic Serial
Number of satellite radio.
“AUX” OFF/ON1*/
ON2
Sets whether to display AUX
during source selection.
“CD READ” 1*/2 Sets the CD read mode.
“DEMO
MODE”
Refer to
page 14
Specifies whether to enable
demonstration.
—
*Factory setting
* Function of KDC-X492.
* Function of KDC-MP438U.
* Function of KDC-MP408U.
* Function of KDC-MP338.
Displayed item is depending on currently selected
source. The mark in Source column shows the
source to which the item is displayed.
: Can be set in other than standby state.
: Can be set in standby state.
: Can be set while Audio file source of CD/USB
(excluding iPod).
: Can be set during FM reception.
: Can be set during Satellite radio source.
: Can be set while accessing AUX source.
: Can be set while HD Radio source.
— : Can be set during all sources.
1 Enter Menu mode
Press the [M.JOG] button for at least 1 second.
“MENU” is displayed.
2 Select the menu item
Push the Control knob towards up or down.
3 Set the menu item
Push the Control knob towards right or left.
4 Exit Menu mode
Press the [M.JOG] button.
⁄
• Refer to the respective page for information on how to
set the items with reference page number.
• ”ZONE2” is displayed when ”2ZONE” in <Audio Setup>
(page 7) is set to ”ON.
• Refer to the <Appendix> (page 16) for the details of the
menu items.
• Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned ON.
In such a situation, turn it OFF.
Activating Security Code
⁄
• You can set the Security Code with a 4 digit number of your
choice.
• The Security Code cannot be displayed or referenced. Make
a note of the Security Code and treasure it up.
1 Select Security Code item during Menu mode
Select the “SECURITY SET” display.
For how to select menu items, refer to <Menu
System>(page 12).
2 Enter Security Code mode
Press the Control knob for at least 1 second.
When “ENTER” is displayed, “CODE” is also displayed.
3 Select the digits to enter
Push the Control knob towards right or left.
4 Select the Security Code numbers
Push the Control knob towards up or down.
