6
|
DPX503/DPX303
Category Item Setting Entry Setting overview Condition Page
MENU “Security Set”/
“Security Clear”
1 sec.
Sets/Resets security code
17
“SRC Select” “1”*/ “2”
Sets the source selection method.
29
“iPod Mode”*
1
“OFF”/ “ON”*
When set to “ON”, allows you to select music in the manner
similar to that of the iPod.
13
“AT COL CHG”*
1
“OFF”/ “iPod”*
When the iPod source is used, sets whether the illumination
color is changed by the iPod.
29
“Beep” “OFF”/ “ON”*
Setting the operation check sound (beep sound) ON/OFF.
“Clock Adjust” 1 sec.
Sets the clock.
—18
“Date Adjust”
1 sec.
Sets the date.
18
“Date Mode” 7 types 1 sec.
Sets the date display mode.
“SYNC”*
1
“OFF”/ “ON”*
Synchronizing the RDS station time data and this unit’s
clock.
“DSI” “OFF”/ “ON”*
A red indicator will blink on the unit after the ACC is set to
OFF, warning potential thieves.
“Display” “OFF”/ “ON”*
Turns off the display when no operation is performed.
—29
“Dimmer” “OFF”/ “ON”*
Dims the display part in conjunction with the light switch
of the vehicle.
“ILM Dimmer” “AUTO”*/ “MNAL”/
“OFF”
Sets whether the illumination is dimmed in conjunction
with the light switch of the vehicle or it is dimmed
constantly.
29
“ILM Effect” “OFF”/ “ON”*
Sets whether the illumination color is changed in
conjunction with the key operation.
“ILM MSC SYNC” “OFF”*/ “ON”
Sets whether the key illumination color is changed in
conjunction with the sound volume.
—
“ILM Color”
*
2
“Blue”*/ ”Red”/
”Green”
Sets the button illumination color.
“SWPRE” “Rear”*/ “Sub-W”
Sets the preout output.
29
“AMP” “OFF”/ “ON”*
Turns on/off the built-in amplifier.
29
“Zone2” “Rear”*/ “Front”
Specifies the destination of AUX input sound when the Dual
Zone function is turned on.
29
“Supreme” “OFF”/ “ON”*
Turns ON/OFF the Supreme function.
29
“TI”
*
1
“OFF”*/ “ON”
Switches to the traffic information automatically when the
traffic bulletin starts.
“CRSC” “OFF”/ “ON”*
Switches to Monaural to decrease noise when reception is
poor.
“Receive Mode” “Auto”*/ “Digital”/
“Analog”
1 sec.
Sets the receive mode of HD Radio.
29
“ESN=”
Displays the Electronic Serial Number of satellite radio.
“Name Set” 1 sec.
Sets the station name (SNPS)/ disc name (DNPS)/ AUX
name.
11
“Scroll” “Auto”*/ “Manual”
Specifies whether the text is scrolled automatically.
—
“Built in AUX” “OFF”/ “ON”*
Sets whether to display AUX during source selection.
“CD Read” “1”*/ “2”
Sets the CD read mode.
29
“Audio Preset”*
2
1 sec.
Presets the setting value of the audio control. The preset
value is retained after resetting.
24
“DISP REVERSE”
“POSI 1”/ “POSI 2”/
“NEGA 1”*/ “NEGA 2”
Switches the panel display between positive or negative.
—30
“CONTRAST” “1” – “10”
Adjusting the display contrast.
—
Function Control
Functions in the table below can be set up by using Function Control.
