13
MARKER SETTING Menu Screen
Settings in bold are factory default settings.
Item Setting ValueDescription
ASPECT TYPE VIDEO
CINEMA
This item sets the purpose of the marker.
VIDEO : Aspect for TV broadcast shooting
CINEMA : Aspect for cinema shooting
Note：
●
When the input format is 4:3,
A
CINEMA
B
cannot be selected.( [VIDEO] is displayed.)
RATIO When ASPECT
TYPE is set to
AVIDEOB
16:9
4:3
14:9
16:9+4:3
This item sets the aspect ratio of the marker. It displays the configured aspect
ratio of the marker. When set to A16:9+4:3B, the 16:9 and 4:3 marker are
displayed at the same time.
Note：
● A16:9+4:3B is displayed when the VIDEO FORMAT at the camera is HD
mode.
When ASPECT
TYPE is set to
ACINEMAB
2.35:1
1:66:1
1:75:1
1:85:1
POSITION CENTER
C.HEADRM
This item sets the display position of the marker.
CENTER : Sets the display position of the marker at the center of the screen.
C.HEADRM : Sets the display position of the marker at the upper side of the screen.
Note：
● AC.HEADRMB can only be set when [RATIO] is A2.35:1B or A1:85:1B. For
other settings, [CENTER] will be displayed and setting is disabled.
ASPECT MARKER OFF
ON
This item sets the marker outside the aspect area.
OFF : Cancels the marker outside the aspect area.
ON : Displays the marker outside the aspect area.
Note：
● When connected to GY-HD250U and [VF SIGNAL] is set to ARGBB at the
camera LCD/VF MENU screen, set SAFETY ZONE at the camera to
AOFFB. Settings at VF will be invalid.
● When camera output is set to BARS, this function is AOFFB during Return
Video display, 1:1 display and when status display is OFF.
TYPE LINE
HALFTONE
LINE+HALF
This item sets the type of labeling for markers outside the aspect area.
LINE : Displays the aspect area in lines.
HALFTONE : Displays the image level outside the aspect area in half the
brightness.
LINE+HALF : Displays the aspect area in lines and sets outside the area
in half the brightness.
SAFETY ZONE OFF
ON
This item sets the marker inside the aspect area.
OFF : Cancels the marker inside the aspect area.
ON : Displays the marker inside the aspect area.
Note：
● When connected to GY-HD250U and [VF SIGNAL] is set to ARGBB at the
camera LCD/VF MENU screen, set SAFETY ZONE at the camera to
AOFFB. Settings at VF will be invalid.
● When camera output is set to BARS, this function is AOFFB during Return
Video display, 1:1 display and when status display is OFF.
● The above feature may not function depending on the version of the
camera's software. For details, please consult JVC's authorized dealers.
SIZE 95 %,
93 %, 90 %
88 %, 80 %
This item sets the display percentage for markers inside the aspect area.
CENTER MARK This item sets whether to display markers in the center.
OFF : Cancels the center marker.
ON : Displays the center marker.
Note：
● When connected to GY-HD250U and [VF SIGNAL] is set to ARGBB at the
camera LCD/VF MENU screen, set SAFETY ZONE at the camera to
AOFFB. Settings at VF will be invalid.
● When camera output is set to BARS, this function is AOFFB during Return
Video display, 1:1 display and when status display is OFF.
PAGE BACK ^ This returns to the [MAIN MENU] screen
VF-HP840U_EN.book Page 13 Thursday, January 17, 2008 2:48 PM
