– 22 –
English
Changing the Source Name
You can change the source name of the external component
according to the one connected to the unit.
• You cannot change the source names while recording.
On the remote control ONLY:
1
When the source is “LINE*,” press and hold
TUNER/LINE until “NAME CHANGE” appears in
the main display.
* If you have changed the source name of the external
component, the currently selected source name will appear.
2
Press SELECT ¢ or SELECT 4 to select an
appropriate source name.
• Each time you press the button, the source name
changes as follows:
LINE “ TAPE “ DBS “ VCR “ TV “
GAME “ (back to the beginning)
• To cancel the setting, press CANCEL.
3
Press SET to finish changing the source name.
The selected source name appears in the main display.
Ex. When selecting “TAPE”
EN20-22_NX-HD10[J_C]f.pm6 02.6.14, 10:21 PM22
