ENGLISH - 123 -
7. Follow the operating procedure Downloading the data
to VCR on page 117 to transmit the revised programme
table data to the VCR.
If you do not want to transmit, press PICTURE button
to exit the menu.
Note:
You can only use this item if you have a decoder connected
to a T-V LINK compatible VCR to EXT.2 terminal. Setting this
item to ON by mistake causes the picture/sound of a TV
channel you are currently viewing to disappear.
If this item has been set to ON but the TV channel cannot
be unscrambled, check the following:
Has the decoder been connected to the VCR properly ac-
cording to the VCR and Decoder instruction manuals?
Can the TV channel be unscrambled with a decoder?
Do you need to change the VCR settings in order to con-
nect the decoder? Confirm that the VCR is set properly by
rechecking the VCR instruction manual.
Program (Programming) Menu
You can use the Program (Programming) menu to delete a
channel, to change the programme number of a channel, to
give a channel name to a channel, and to start the AUTO
PROGRAM (AUTOSTORE) function.
Press MENU button to display the main menu.
Press
or button to select PROGRAM item,
then
or button to display the PROGRAM menu.
To choose a channel in the PROGRAM menu:
Press / / / button. The programme num-
ber that you choose is high-lighted in the PROGRAM menu
and you can view the picture of that channel.
Caution:
Using DELETE or INSERT function rewrite the current
channel list in the PROGRAM menu. Therefore, the pro-
gramme numbers of some of channels will change.
When you complete the settings of PROGRAM
menu:
If you have a T-V LINK compatible VCR, press the but-
ton to display the T-V LINK menu. Then follow the operating
procedure Downloading the data to VCR on page 117 to
transmit the Programme table data to the VCR.
If you do not have a T-V LINK compatible VCR, press PIC-
TURE button to exit the menu.
To give a channel name (NAME):
1. Choose the channel you want to give a channel name.
2. Press the RED button to enter the NAME mode.
3. Press
or button to choose the position, and press
or button to choose each character of chan-
nel name.
4. Press the RED button to store the channel name.
To cancel the NAME mode, press the BLUE button.
To delete a channel (DELETE):
1. Choose the channel you want to delete.
2. Press the YELLOW button to enter the DELETE mode.
3. Press the YELLOW button to delete it.
To cancel this DELETE mode, press the BLUE button.
To change the programme number of a channel
(INSERT):
1. Choose the channel you want to change the programme
number.
2. Press the GREEN button to enter the INSERT mode.
3. Press
/ / / button to choose new
programme number.
4. Press the GREEN button to insert the channel to the cho-
sen programme number.
To cancel this INSERT mode, press the BLUE button.
To start AUTO PROGRAM (AUTOSTORE)
AUTO PROGRAM Automatically programmes the received
channels in your TVs programme numbers.
1. Press the BLUE button to enter the AUTOSTORE mode.
A warning message appears.
To cancel the AUTOSTORE mode, press the PIC-
TURE button.
2. Press
or button to choose the COUNTRY,
then press
or button the choose country you are
now located.
3. Press
or button to choose the CONTINUE,
then press
button to start AUTO PROGRAM The fol-
lowing message appears.
08-ENG-2835-AK45-1512UK-16-9-(AV-28GT20U)-50053856.p65 22.07.2004, 17:39123
