Button Functions
28
VCR Buttons
You can use this remote control to operate the basic functions of your JVC Brand VCR. These
functions include: play, record, rewind, fast-forward, stop, pause, channel scan, TV/VCR, power on,
and power off.
The R
ETURN+button has two functions:
Return - Returns to the channel viewed just before the channel currently onscreen.
Return+ - Lets you program a specific channel to return to while scanning through the channels
using the CH+ and CH- buttons.
R
ETURN+ and hold for three seconds
The channel currently active has been programmed as your Return+ channel. Now scan through the
channels using the C
HANNEL+/- buttons
RETURN+
You will return to your programmed channel.
• To cancel your Return+ channel, press and hold the RETURN+button for three seconds.The message
“RETURN CHANNEL CANCELLED!” will appear.
• Return+ works only with the C
HANNEL+/- buttons. Pressing any number key will cancel Return+.
Use the 100+ button to directly access channels above Channel 99. For example to move to channel 124,
press100+, then 2 (two), then 4 (four).
RETURN CHANNEL
PROGRAMMED !
100+ Button
Return+
Input
Selects the input source for the television: TV (Cable or antenna input) or Video (VCR or other video
device such as camcorder or video game console).
INPUT
TV REAR IN FRONT IN
Hotel IB 6/28/2001 10:14 AM Page 28
