63
NS-32DD200NA14 Insignia 32" LED TV/DVD Combo
www.insigniaproducts.com
Waking INlink-compatible (HDMI CEC)
devices
When a connected INlink-compatible device is in
standby mode, Connect wakes (turns on) the
device.
To wake INlink-compatible (HDMI CEC) devices:
1 Press INPUT, press
S
or
T
to highlight the
CEC-compatible device you want to wake, then
press ENTER.
2 Press TV-MENU. The on-screen menu opens.
3 Press
W
or
X
to highlight Settings, then press
T
or OK. The SETTINGS menu opens.
4 Press
S
or
T
to highlight INlink, then press OK.
The SETTINGS · INlink menu opens.
5 Press
S
or
T
to highlight Connect, then press
OK. The HDMI CEC-compatible device in
standby mode turns on.
6 Press TV-MENU to return to the previous menu,
or press EXIT to close the menu.
Opening an INlink-compatible device’s root
menu
You can open an INlink-compatible device’s root
menu, then use your TV’s remote control to control
the device.
To open an INlink-compatible device’s root
menu:
1 Press INPUT, press
S
or
T
to highlight the
CEC-compatible device you want, then press
ENTER.
2 Press TV-MENU. The on-screen menu opens.
3 Press
W
or
X
to highlight Settings, then press
T
or OK. The SETTINGS menu opens.
4 Press
S
or
T
to highlight INlink, then press OK.
The SETTINGS · INlink menu opens.
5 Press
S
or
T
to highlight Root Menu, then press
OK. The device’s root menu opens, and you can
use your TV’s remote control to control the
device.
6 Press TV-MENU to return to the previous menu,
or press EXIT to close the menu.
