30
NS-14T002 Insignia Flex™ Android Tablet
www.insigniaproducts.com
5 Touch Connect to connect to the wireless access point. If the
connection is successful, the connected icon appears in the upper
right corner of the screen.
Adding a Wi-Fi network
To add a Wi-Fi network:
1 Touch the (home) icon, touch the (applications) icon, then
touch the (settings) icon. The Settings screen opens.
2 Slide the Wi-Fi switch to the ON position. A list of available networks
opens. Secured networks are indicated with a Lock icon.
3 Touch + at the top right corner of the screen.
4 Use the on-screen keyboard to enter the network SSID, then touch the
security type you want to use. You can select:
• None—No security.
• WEP—Wired Equivalent Privacy. Note: A passphrase is required.
• WPA/WPA2 PSK—Wi-Fi Protected Access. Note: A password is
required.
• 802.1 x EAP—802.1x Extensible Authentication Protocol.
Note: If you are not sure which security type to select, refer to your
network setup documentation.
NS-14T002_13-0622_MAN_V1_ENG.fm Page 30 Friday, October 11, 2013 3:02 PM
