A SERVICE OF

logo

Switch and Jumper Locations
The component locations differ depending on the level of the adapter. However, the function and settings
of the jumpers and switches are the same.
Figure 2-1. Switch and Jumper Locations
Installation Procedure
To install the 8-port adapter, perform the following steps.
Review the precautions on handling static-sensitive devices (page 2-2).
Set the option switches and jumpers (starting on page 2-4).
Install the adapter (page 2-12).
Download the operating system support and diagnostic programs (page 2-13).
Run diagnostics to verify the installation (page 2-13).
Connect the optional cable (page 2-13).
Set up the configuration files (page 2-13).
Configuring the IBM ARTIC186 8-Port Adapter
Before installing the 8-port adapter in the computer, set the switches and jumpers on the adapter as
required for your installation. As you configure the adapter, record these settings in Table 2-1 on
page 2-3.
2-4 IBM ARTIC186 8-Port Adapter GTO