Hydraulic System
›
Three heavy-duty gear pumps, supplying 430 l/min.
›
Leak free ORFS type hydraulic fittings.
›
Filtration:
- Two fulltime, full flow 10 micron return line hydraulic filters
- Two 150 micron suction-filters, high pressure 20 micron filter to
protect sensitive parts of the hydraulic system,
- 10 micron air-breathers with indicator on the hydraulic tank.
- Hydraulic tank capacity 600 litres.
›
Tropical hydraulic system cooling, suitable up to 50°C ambient.
Spreader Specifications
Hyster 20’-40’ Telescopic top lift spreader for handling ISO containers with a
height of 8’ to 9’6”, features:
›
Pendular floating ISO twistlocks.
›
Automatic twistlock locking (manual locking also possible). Unlocking is
done manually.
›
434 mm total sideshift - 217 mm each side.
›
5° Free mechanical sideways articulation (horizontal self-levelling).
›
9° Hydraulic powered slew (4.5° each side) or
210 mm of forward / backwards reach movement.
›
Twistlock indicator flags on the spreader corners.
›
Twistlock indicator lights in the cab, and on the spreader.
›
Twistlock lock-out device, built into the spreader, to help prevent:
- engaging a container by less than 4 corners,
- unlocking when carrying a container.
›
Lift interrupt system, to prevent lifting a container with partially turned
twistlocks
›
Anti-slack function to help prevent the mast over-lowering / the lift chains
slackening.
›
‘Gather guides’ near the two rear twistlocks, for easier spreader
engagement.
›
4 Lifting eyes, on the 4 corners of the end-beams of the telescopic
container spreader, for lifting general cargo.
›
2 Wide-beam work lights on the spreader, pointed to the rear twistlocks
08
