12
P/N 211022 01/05
4.
IMPORTANT! Center alignment
slot of lower pole section (6) in
a lower hole of middle pole
section (5) as in step 3. While
maintaining alignment, bounce
assembly and lower pole section
(6) together as shown until they
no longer moved toward taped
reference mark.
5
4
4
5
6
WOOD SCRAP
(NOT SUPPLIED)
IMPORTANT! Center
alignment slot of middle pole
section (5) in a lower hole of
top pole section (4) as shown.
While maintaining alignment,
bounce pole top (4) and middle
section (5) together as shown
until they no longer move toward
taped reference mark. Upright
assembly.
3.
WOOD SCRAP
(NOT SUPPLIED)
POLE SECTIONS
SHOULD HAVE A
3-1/2" (9 CM)
MINIMUM OVERLAP.
NOTE:
POLE SECTIONS
SHOULD HAVE A
3-1/2" (9 CM)
MINIMUM OVERLAP.
NOTE:
