A SERVICE OF

logo

3
10/04 P/N 21156109
24" (61 cm)
36" (91.4 cm)
Ensure ground is level with playing
surface, then dig pole hole.
GROUND
SURFACE
PLAYING
SURFACE
1.
CONTACT UTILITIES
BEFORE DIGGING.
WARNING
Install threaded ends of J-bolts (1) through holes in
mounting plate (3) and secure as shown.
NOTE: Make sure J-bolts (1) are in the illustrated
position.
NOTE: Nuts on the top of plate are used for leveling the
pole after system is fully assembled.
2.
3
2
2
2
1
3.
1
Install nut (2) to J-bolt (1)
as shown. Repeat
procedure for other three
J-bolts (1).
IMPORTANT!
Make sure nuts are 2”
(5.08 cm) from top of J-Bolts.
2”
(5.08 cm)