To remove/delete an item:
1. Tap and hold the item.
2. When the unit vibrates, drag the item to the at the bottom of the
screen.
To move an item:
1. Tap and hold the item.
2. When the unit vibrates, drag the item to the new location, then release.
Note: The next panel automatically opens if you drag the item to the edge
of the touch screen.
Using the Color Camera
1. Tap > Camera .
2. Make sure the Camera/Video switch is set to .
3. Point the camera lens at the object you want to
capture, then tap .
Using the Scan Engine
1. Tap > Demos > Scan Demo .
2. Point the Dolphin terminal at the bar code.
Note: For optimum performance,
avoid reflections by scanning
the bar code at a slight angle.
3. Tap Scan or press the SCAN key.
4. The decode results display on the touch screen.
