15
Basic Operation
Power On/Off
To switch on the TV
1
Press the main power switch located on the
lower right hand side of the TV.
The power indicator lights in red, indicating
that the TV is in standby mode.
2
Press .
The power indicator lights in blue and the
TV switches on.
To switch off the TV
1
Press .
The power indicator lights in red and the
TV switches off to standby mode.
2
Press the main power switch located on the
lower right hand side of the TV to completely
power off the TV.
sIt takes approximately 15 seconds for the picture to
appear after the TV is turned on.
sThe TV will switch to standby mode automatically if
there is no signal input for 15 minutes.
sIf the TV will not be used for a long period of time,
unplug the TV from the wall socket outlet.
Input Source Selection
To select input source
1
Press .
2
Press / to select the desired input source
(DTV, TV, AV, COMPONENT, HDMI1, HDMI2,
HDMI3, RGB, MEDIA).
3
Press OK to set your selection.
Volume Adjustment
To change the volume
1
Press to increase the sound volume.
2
Press to decrease the sound volume.
To mute the sound
1
Press to temporarily turn off the sound.
2
Press or to restore the sound to
previous level.
sYou can decrease the sound volume by pressing
while the sound is muted.
On-Screen
Display
(OSD)
Selection and
Adjustment
1
Press to display the main menu.
2
Press / to select a menu.
The selected menu page displays.
3
Press / or OK to set your selection.
4
Press / to choose an item on the menu
page.
5
Press / to adjust an item value or choose
options.
6
Press to return to the previous menu
screen, or press repeatedly to exit the
menu.
sThe OSD menu screen will be closed automatically
when no operation has been made for a certain
time.
