76
Symptoms Check list Page
• The image on the screen is moving
in an oblique direction.
(RGB mode only)
•
Adjust “Horizontal Clock” and “Clock Phase”.
30
• The coarse horizontal stripes could
be seen in full-display mode.
(RGB mode only)
• Adjust “Horizontal Clock”.
30
• The part of the image is lacking.
(RGB mode only)
AAAA
• Try “Auto Adjust”.
30
• The horizontal stripes are moving
vertically with fl ickering screen.
(RGB mode only)
• Check the Signal status of the PC by pressing button
on the remote control.
• When the characters are displayed
on the whole screen, the vertical
stripes appear and some of the
characters are blurred.
(RGB mode only)
ABCDEFGHIJ
abcdefgABCDEFGabcd
ABCDEFGHIJ
abcdefgABCDEFGabcd
• Try “Auto Adjust”.
• If the display condition is not improved with Auto Adjust,
adjust “Horizontal Clock”.
30
• When the letter string is displayed in
full-screen, all of the characters on
the screen are blurred.
(RGB mode only)
ABCDEFGHIJ
abcdefgABCDEFGabcd
ABCDEFGHIJ
abcdefgABCDEFGabcd
• Try “Auto Adjust”.
• If the condition is not improved with Auto Adjust, adjust
“Clock Phase” till you get clearest image.
30
• When the small patterns are
displayed on the screen, the entire
screen is fl ickering.
(RGB mode only)
•
Try “Auto Adjust”.
•
If the condition is not improved with Auto Adjust, adjust “Clock
Phase” till you get fl icker-free display.
30
• Image cannot be displayed in the
correct position.
(RGB mode only)
• Press
button to check if the input signal of the
displayed image is compatible with the specifi cation of the
television.
30
,
77
79
Symptom and Check List (continued)
TROUBLESHOOTING (continued)
Downloaded From TV-Manual.com Manuals
