Hitachi HV-D25 Manual

A SERVICE OF

next previous

47

Function Selection by Internal Switch Setting

SW405

For connection with the remote control box RC-C10,

set SW405 to the RC-C10 position.

For connection with the personal computer, set SW405

to the RS-232C position.

At shipment from factory, SW405 is set at the RC-C10

position.

Connectors

MULTI connector (SDEB-9S) REMOTE connector (HR10A-7R-4S)

Pin No. Signal designation Pin No. Signal designation

1  GND 1  +12V output

2  WE 2  RXD/SD input

3  R/R-Y/C output 3  TXD/SD output

4  G/Y output 4  GND

5  B/B-Y output

6  VBS output

7  SYNC output

8  HD output

9  VD output

Use M2.6 plug retaining screws.