81
On-Screen Display
15. If you would like to label your A/V Receiver
Source, use the CURSOR PAD ̇ or ̈ to
highlight “ Yes “ then press the SELECT
button to continue. Selecting “ No “ will
bypass the Source labeling.
16. Use the CURSOR PAD ̆ or ̄ to select your
A/V Receiver Sources.
17. Use the CURSOR PAD ̇ or ̈ to label your
A/V Receiver Sources.
18 Use the CURSOR PAD ̇, ̈, ̆ and ̄ to
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
19. Confirm all settings, then press the SELECT
button to move on to the next SETUP screen.
20. Press SELECT to setup another device or use
the CURSOR PAD ̇ or ̈ to highlight “ No
thanks, I'm done “, then press the SELECT
button to exit the A/V NET SETUP.
AV NET SETUP WIZARD ( Example: DVD
Setup )
1. Press the SELECT button to start the SETUP
WIZARD.
2. Use the CURSOR PAD ̆ or ̄ to highlight NO.
3. Press the SELECT button to select.
(Select NO to setup other devices).
4. Use the CURSOR PAD ̇, ̈, ̆ and ̄ to
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
5. Use the CURSOR PAD ̇, ̈, ̆ and ̄ to
highlight the device.
( Example : DVD Setup ).
6. Press the SELECT button to select.
7. Use the CURSOR PAD ̇, ̈, ̆ and ̄ to
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
Setup
