61
Setup
On-Screen Display
AV NET SETUP WIZARD ( Example: DVD Setup )
1. Press the SELECT button to start the SETUP
WIZARD.
2. Use the CURSOR PAD ̆ or ̄ to highlight NO.
3. Press the SELECT button to select.
(Select NO to setup other devices).
4. Use the CURSOR PAD ̇, ̈, ̆ and ̄ to highlight
NEXT, then press the SELECT button to move on to
the next SETUP screen.
5. Use the CURSOR PAD ̇, ̈, ̆ and ̄ to highlight
the device.
( Example : DVD Setup ).
6. Press the SELECT button to select.
7. Use the CURSOR PAD ̇, ̈, ̆ and ̄ to highlight
NEXT, then press the SELECT button to move on to
the next SETUP screen.
8. Use the CURSOR PAD ̇ or ̈ to choose the brand
name of your DVD.
9. Press the CURSOR PAD ̄ to highlight the IR CODE
Set, then use the CURSOR PAD ̇ or ̈ to choose
the preset IR Code.
10. Use the CURSOR PAD ̄ to highlight the “ POWER ”
Test button.
These On-screen buttons are called “ Soft Keys ”.
11. Press the SELECT button to pass the Power
command through the IR mouse and onto the DVD.
( Repeat steps 9 to 11 until finding the IR code that
will power up the A/V Receiver. If the DVD turns ON,
then you have found the correct preset IR code ).
12. Use the CURSOR PAD ̇, ̈, ̆ and ̄ to highlight
NEXT, then press the SELECT button to move on to
the next SETUP screen.
13. Use the CURSOR PAD ̇ or ̈ to select the TV Input
that connects to the video and audio output of the
DVD.
14. Use the CURSOR PAD ̇, ̈, ̆ and ̄ to highlight
NEXT, then press the SELECT button to move on to
the next SETUP screen.
